For updated information on test equipment please follow LINK TO OUR SERVICE PAGE 

 

Test  equipment for High Velocity Valves and P-V Valves

Industry standards are continuously improved on, and so are the requirement from authorities and charters. Furthermore, there seems to be a clear expectation from the public that environmental and financial issues are being handled in a professional and viable way. In line with said focus, testing of the P-V valves are required to take place on a more frequent basis than before, and thus the need for high accuracy Test equipment for High Velocity Valves and P-V Valves are now increasingly high on the agenda.

 

Please browse this page for Test  equipment for High Velocity Valves and P-V Valves  and general information.

 

PORTABLE TEST BOX

Test equipment for High Velocity Valves and P-V Valves high velocity valves and p-v valves Test equipment for High Velocity Valves and P-V Valves Test equipment for High Velocity Valves and P V Valves
Test equipment for High Velocity Valves and P-V Valves

 

 

DOWNLOADS

90101 test bench

90102 portable test bench

Testing and adjusting set pressure on Hi jet ISO II

P-V Valves Test Bench operation

 

Instruction manual portable test box

 

 

 

 

 

 

The portable Test equipment for High Velocity Valves and P-V Valves can be used both in workshops and on-site without dismantling the valves prior to testing.

For workshop testing it comes with a portable adapter plate on which the valves are easily mounted and tested for both pressure- and vacuum setting in one sequence.

 

WORKSHOP TEST BENCH

Test equipment for High Velocity Valves and P-V Valves  high velocity valves and p-v valves Test equipment for High Velocity Valves and P-V Valves IMG 0361 e1397400952603
Test equipment for High Velocity Valves and P-V Valves

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Establishing and adjusting set pressure on High Velocity Valves and P-V Valves

 

Adjusting pressure setting on HI Jet ISO II valves.

 

  1. Pressure regulator is adjusted to 2 bar
  1. Flow regulator is adjusted to allow app. 12-15 seconds pressure rise from zero pressure reading from zero to constant reading i.e. pressure stabilizes (setting)
  1. Release pressure inside valve by activating valve check-lift.
  1. Repeat 4 times for 4 different position of the valve disc by turning this by hand when check-lift are operated.
  1. Close shut-off valve.
  1. Adjust setting to towards desired pressure by turning magnet clock-wise or counter clock-wise (please consult maintenance manual for the particular valve).
  1. Open shut-off valve and check new setting. Repeat if necessary, otherwise lock magnet by locking plate and locking nut.

 

Establishing Leakage rate

Build up pressure to 80% of setting following the procedure for setting test i.e. app.15 seconds frm zero pressure to 80% of setting.

At 80% , close all ball valves and air supply to have a complete closed container.

Observe pressure for 60 sec, and enter the difference in pressure reading in the gas constant equation/ excel template for establishing leakage in l/min.